176 how to change shower head[/caption]how to change shower head easily and safely. Leaking shower head is very annoying and wasteful of water. There are many causes of leaking shower head. However, to fix it you should not call the repairman. The solution is actually quite easy. To save the cost of the repairs of which there is not a bit, do some of the following tips to fix Your shower head.
1. Clean the shower head Holes Clogged
a. turn off the water supply to the shower. Shower Head could be leaked because of the clogged so lime holes and mineral deposits increasingly accumulate. This is a good way to start the repair because this step is easy, inexpensive, and you don't have to take off all of the shower. turn off the water supply before starting.
This can be done in two ways: Locate and close the valve to the bathroom or to turn off the main water valve.
It would be easier if the water valves to the bathroom are turned off than decided to the whole House.
The valve into the bathroom there are usually near a shower or in the basement of the House.
b. remove the license plate hole water shower or uninstall only the whole shower head. Part a clogged shower head needs to be removed as it will be cleaned from lime and mineral deposits.
Remove the screws in the plate hole water, if possible. If not, remove the shower head from the whole body. How to let it go depending on the model of your shower.
Generally, there are several screws around the shower head plates. After screw-screw is opened, the play against the clock or the direction of the drag plate to let go.
c. soak the plates or the whole shower head in vinegar for 8 hours. Provide a container large enough to hold the shower head. If you have more than one sink, please use one of these if it is big enough
Fill the container with white vinegar to taste to the whole plates and shower head submerged.
Plug the alarm for 8 hours ahead. While immersed, vinegar will dissolve all deposits in the shower,
d. clean the remains of sediment with a toothpick. After 8 hours, it should be almost all sediment is already dissolved. Take a toothpick or small nails to clean up all the sediment that is still left in the hole plate. After that, scrub with a stiff plastic brush.
e. Check if the leak was already resolved. Attach the shower head back into his body. Open the water supply again but don't open Your shower faucet. If there is no more water dripping from the shower head, it means the problem is finished.
No comments:
Post a Comment